NOT AVAILABLE Chevy - LQ9 6.0L without ECM and Wire Harness

Too much? Nah. GM Performance built the LQ9 to use all of its cubic inches to produce 345 HP and 380 lb.-ft. of torque. It's a 6.0 Liter powerhouse. LS engines are all good performers used in the Cadillac Escalade AWD. Built on a sturdy iron block with 6 bolt main caps, the LQ9 will last for a long time to handle what you dish it. LQ9 engines are torque monsters and run smooth. GMPP LQ9 engines include an intake manifold, throttle body, fuel rail with injectors, balancer, exhaust manifolds, water pump and a flexplate.

Possible Applications

  • Replacement engine for a late model GM truck
  • High-tech torque for a work truck

*Applications have not been validated. They are merely suggestions of how you might enjoy your GM Performance Parts crate engine. Some applications may affect engine warranty. See specific warranty information. Some applications may not be emission legal; check state and local ordinances.

LQ9 6.0L TECH SPECS:
Part Number: 19156262
Engine type: LS Series V-8
Displacement (cu in): 364 (6.0L)
Bore x stroke (mm): 101.6 x 92
Block (P/N 12572808): Cast iron with 6-bolt, cross-bolted main caps
Crankshaft (P/N 12569768): Nodular iron
Connecting rods (P/N 12567583): Powdered metal steel
Pistons (P/N 89017478): Cast aluminum
Camshaft type (P/N 12561721): Hydraulic roller
Camshaft lift (in): .467 intake / .479 exhaust
Camshaft duration (@.050 in): 196'c1 intake / 201'c1 exhaust
Cylinder heads (P/N 12562319): Aluminum, symmetrical port
Valve size (in): 2.00 intake / 1.55 exhaust
Compression ratio: 10:1
Rocker arms (P/N 10214664): Investment cast, roller trunnion
Rocker arm ratio: 1.7:1
Recommended fuel: 92 octane
Maximum rpm: 5600
Reluctor wheel: 24X

Cummins Engine Swap Kits

LQ9 engine image

Part #:19156262

LQ9 6 liter dyno image

Installation Notes

  • Crate engine kit does not include wiring, electronics or ECM.
  • 14" automatic transmission flexplate included.